Elmac Technologies Logo
       

          

UK Office

Elmac Technologies

Coast Road
Greenfield
Flintshire

UK
CH8 9DP
 
Phone: +44 1352 717600
Fax: +44 1352 717642
Applications
Anaerobic Digestion & Biogas Plant Safety Equipment

Home » Industries » Anaerobic Digestion & Biogas

Anaerobic Digestion & Biogas Plant Equipment

Elmac Technologies® has a range of explosion protection and low pressure venting equipment available to ensure your anaerobic digestion/biogas plant is protected to the highest possible standards.

Anaerobic Digestion Biogas Plant cowhorn arrangement
Emergency Relief Vents
pressure relief valve flame and detonation arresters gauge hatches

Cowhorn Arrangements

The 'Cowhorn Arrangement' of selector valve and twin sets of pressure relief valves and/or flame arresters, is intended for use on digesters where overpressure and explosion protection is required. By utilising a selector valve, one set of arrester and valve combination can be maintained whilst the other is in service.

Emergency Relief Vents

Non-sparking emergency relief vents permit access to low pressure storage tanks and provide emergency venting capacity in the event of fire. They are used extensively on bulk storage tanks, including floating roof tanks, low pressure gas pipeline systems, digesters, and gas holders.

Pressure & Vacuum Relief Valves

Direct acting pressure / vacuum relief valves, or breather valves are special types of relief valves which are specifically designed for tank protection. The range includes pressure only, vacuum only and combined pressure / vacuum valves, all available with flanged outlets or vented to atmosphere.

Gauge Hatches

Gauge hatches allow easy access to bulk liquid storage tanks for manual level measurement and sampling. Lockable versions are available.

End of Line Flame Arresters

End-of-line deflagration arresters are designed to be installed at the end of a pipeline or exit vent from a vessel, where the ignition source is external, to provide protection against atmospheric deflagration.

Inline Flame Arresters

Inline deflagration arresters are designed to prevent propagation of flames in gas or vapour mixtures in a pipeline. Inline flame arresters must be placed close to the potential source of ignition.

Detonation Arresters

Inline unstable detonation arresters are designed to prevent propagation of detonations in gas or vapour mixtures. Detonation arresters are specifically designed for pipelines with a significant distance between the ignition source and the arrester, or for use where the pipe is rough, bent, obstructed or has section changes.

Microbore Arresters

Microbore flame arresters are specially designed for the protection of gas sampling and analysis equipment where flammable vapours are present. Many other applications involving small bore pipework can be protected from explosion risk using microbore arresters.

© 2012 Elmac Technologies
Elmac Technologies specialises in the manufacture of Flame Arresters and supply of Pressure Relief Equipment.
Privacy Policy  Terms & Conditions